- Home
- >
- Tienda
- >
- U
- >
- Unid. Potencia Hidráulica
- >
- CORTADORA DE CONCRETO HIDRAULICA STANLEY CO25141 CO25
CORTADORA DE CONCRETO HIDRAULICA STANLEY CO25141 CO25
STANLEY CO25141. Motor HYREVZ Gear. Presión de 1500 – 2000 psi.
Sé el primero en escribir una reseña “CORTADORA DE CONCRETO HIDRAULICA STANLEY CO25141 CO25” Cancelar la respuesta
Lo siento, debes estar conectado para publicar un comentario.
Productos Relacionados
UNIDAD DE POTENCIA HIDRAULICA STANLEY HP8BD
UNIDAD DE POTENCIA HIDRAULICA STANLEY HP8BD.
Application:
- Designed to provide power for hydraulic tools requiring a single 5 gpm up to 8 gpm.
Features:
- Briggs Vanguard engine
- Air-to-oil cooler with high-speed blower
- Manual throttle control
- Lift and latch handle
- 12 inch Foam filled tires
- Low oil pressure shutoff
- Electric start and all-electric controls
- 12 vdc plug on some models
Specifications:
- Engines: 18 hp Briggs
- Output Capacity: 5 or 8 GPM (20 or 30 LPM)
- Length: 36 in. / 91.4 cm
- Width: 23 in: / 58.4 cm
- Height: 29.5 in. / 74.9 cm
- Fuel Tank Capacity: 5.5 gal. / 20.8 liters
- Weight (Wet): 330 lbs (149.6 kg)
- Estimated Gas Consumption Per Hour: 1.3 gal / 4 liters
- Hydraulic Reservoir Capacity: 3 gallons / 11 liters
- Relief Valve setting: 2100 psi / 145 bar
- Max relief setting: 2500 psi / 172 bar
- HTMA/EHTMA Category: Type 1 and 2
- Nominal Pressure: 1500 psi/103 bar
- Max Pressure: 2000 psi/138 bar
- Guaranteed Sound Power Level: 101 dBA
- Measured Sound Power Level: 99 dBA
- Vibration Level: N/A
- Dimensions: 35 in. L x 21.5 in. W x 29 in. H (89 cm L x 54.6 cm W x 73.7 cm H)
MARTILLO ROMPEDOR HIDRAULICO STANLEY BR67130E BR67
MARTILLO DEMOLEDORA MARCA STANLEY BR67 BR67130E
The BR67 is a medium duty tool for work in the 70 – 90 pound class
– It is highly productive in utility construction, street maintenance, repair of water and gas mains, and general contracting jobs
– Easi-Ride™ foot, offered on the BR67 absorbs and controls tool bit bounce, greatly reducing operator fatigue
– Feathering on/off valve controls blow speed, making startup and initial tool placement easy
– Operates on open center system 1-1/8″ shank hex size
– Tool Weight: 72 LBS.
DEMOLEDOR ROTOMARTILLO STANLEY HD455310 HD45
Roto-martillo de la serie HD45
El roto-martillo de la serie HD45 de Stanley es una herramienta rotativa de percusión para perforar concreto, mampostería o asfalto usando brocas hexagonales 736 Skil
- Caudal de operación de 7 a 9 gpm (de 26 a 34 lpm)
- Velocidad de rotación ajustable hasta 300 rpm
- Gatillo de encendido/apagado proporcional
- Mangueras flexibles
- Acumulador cargado con nitrógeno
- Control de rotación hacia adelante/atrás
El roto-martillo de la serie HD45 de Stanley es una herramienta rotativa de percusión para perforar concreto, mampostería o asfalto usando brocas hexagonales 736 Skil Caudal de operación de 7 a 9 gpm (de 26 a 34 lpm) Velocidad de rotación ajustable hasta 300 rpm Gatillo de encendido/apagado proporcional Mangueras flexibles Acumulador cargado con nitrógeno Control de rotación hacia adelante/atrás
MARTILLO DEMOLEDOR SULLIVAN PALATEK SPB-90 1 1/4″
La línea de rompedores de pavimento incluye herramientas de mango en “T” de 30, 40, 60 y 90 libras, todas con tamaños de mandril estándar de la industria. Todos están construidos a partir de un diseño de mercado probado, cabezales traseros de 4 pernos, pernos y muelles de barra lateral de alta resistencia, construcción de aleación forjada con mandriles extraíbles. Engrasadores internos en los interruptores de 30, 60 y 90 libras
características y beneficios
- 4 tornillos de cabeza
- Pernos y resortes de barra lateral de servicio pesado
- Construcción de aleación forjada
- Cabeza delantera extraíble
- Buje de mandril reemplazable
- Engrasador internO
Tipo: Interruptor de pavimentación: T-Handle
NetWeight: £ 92.5
Largo: 28.75 »
Diámetro: 2.625 »
Carrera: 6.0625 »
Golpes: 1250
ChuckSizes: 1 1/4 x 6 «
Reseñas